Eon™
Software Updates
Please request a download link of the current software by clicking on the appropriate link below. The version of the software you are usin...
Fri, 10 Oct, 2014 at 7:49 AM
Getting started with Eon™
Plug in the Eon™ and all of its components
Open on the Eon™ software and select the correct COM port
Select the materia...
Wed, 14 May, 2014 at 2:08 PM
Using a Different Power Supply
Only the provided 24 VDC power supply should be used with Eon™. Using a different power supply can damage the circuitry of ...
Wed, 14 May, 2014 at 10:06 AM
Front Panel Controls
Start: Initiates the
selected deposition process. Each time a deposition process is initiated, a new log file is automatically ...
Wed, 14 May, 2014 at 2:24 PM
Eon™ Status Display Elements
Film: Displays the
current film being deposited.
Rate: Displays the
current rate of deposition in Å/s.
T...
Wed, 14 May, 2014 at 2:44 PM
Configuring the COM Port
This pop-up will appear when you start the program for the first time:
Note: The program will save your settings for fut...
Wed, 28 May, 2014 at 2:15 PM
Starting Temperature Control Procedure
Press “Setup” from the front panel
Click on the “Device Parameters” tab
Enter the desired temperature in “R...
Wed, 28 May, 2014 at 2:18 PM
Adding a Layer
Enter the desired layer name in the “Layer Name” field
Press the “Save Layer” button to save the new layer
Enter the desired infor...
Wed, 28 May, 2014 at 2:20 PM
Setting Temperature for “Temp Ctrl”
This item is located on the Setup Menu under "Device Parameters". Along with setting temperature control, t...
Wed, 14 May, 2014 at 3:42 PM
Adding a Process
Enter the desired process name in the “Set Process Name” field
Press the “Save Process” button to save the new process
Select th...
Wed, 28 May, 2014 at 2:33 PM